Home / Biosystems / Filtration / Equipment / Monitoring and Control / Etatron Econtrol Phredox Controller

Etatron eControl pH/Redox Controller

Etatron eControl pH/Redox Controller
2 channel pH & Redox 100/250V
  • Description
  • Spares
  • Dimensions


• Sensor calibration: 0.00 ÷ 14.00 “pH”, -1000 ÷ +1400 mV “Redox”, 0÷2, 0÷20, 0÷200 ppm (Cl), 0÷2, 0÷20, 0÷200 ppm (Ion-selective sensor of for a specific chemicals).

• Temperature control definition: automatic (connection to PT100 sensor) or manual (default 25°C).

• 2 set points for each measure input.

• Type of intervention (direct or inverse).

• Hysteresis.

• ON/OFF or proportional activation mode.

• Delay time of the pump activation.

• MAX alarm, for maximum measure.

• MIN alarm, for minimum measure.

• Over alarm, indicates an overdose situation. This is activated when the defined set point value is not reached in a predetermined time.

• 4 - 20 mA output, galvanically isolated.

• Relay output for signalled alarm status.    

Associated Products

["products\/drygoods\/equipment\/etatron-products\/etatron-redox-probe","biosystem\/filtration\/equipment\/monitoring-and-control\/etatron-redox-probe"]
["products\/drygoods\/equipment\/etatron-products\/etatron-ph-probe","biosystem\/filtration\/equipment\/monitoring-and-control\/etatron-ph-probe"]
["products\/drygoods\/equipment\/elecro-heaters\/temp-probe-5m-cable","biosystem\/filtration\/equipment\/monitoring-and-control\/temp-probe-5m-cable"]