Accueil / Biosystem / Filtration / Équipement / Écumeurs de protéines / Rk2 Systems 150 High Flow Protein Skimmer

RK2 Systems 150 High Flow Protein Skimmer

RK2 Systems 150 High Flow Protein Skimmer
  • Description
  • Pièces de rechange
  • Dimensions

Protein Fractionation filtration removes suspended particulates, dissolved organics, proteins and tints. At the same time, protein fractionation lowers bacteria and pathogen concentrations, while saturating the water with oxygen. Traditional water filtration systems, (i.e: pressurized sand filters, bead filters and cartridge filters), remove particulates but are ineffective against dissolved wastes and act as breeding grounds for bacteria and pathogens.
 
Water that is filtered through traditional filters is constantly sieved through the trapped wastes. Similar to that of a tea bag, this action leaches bacteria, dissolved organics and tints back into the water. The media in the filter functions as a bio-filter, promoting bacteria, which in turn strip out oxygen. Consequently, the discharge from these filters is generally enriched with bacteria and dissolved organics as well as having reduced oxygen concentration.
 
The fractionation filtration process is simple and highly effective. Air, (in some cases ozone as well), are injected into the bottom of the reaction chamber via an ozone resistant venturi injector. The water to be filtered is introduced at the top of the chamber and exits at the bottom. This creates a mass mixing effect, with the water traveling cross current to the air, which is essential for the effective formation of foam. The foam rises through the column and becomes more concentrated as it passes into the upper rise tube. The tube allows for the water to drain back into the tank via gravity, while the concentrated foam is ejected over the top of the riser tube and collected into a waste drain. The upper chamber is automatically washed down with rinse systems that keep the surfaces clean and prevent the foam from drying and inhibiting the ejection process.

• Les corps des RK2 Protein Skimmer sont fabriqués d'une seule pièce, moulés par rotation, éliminant ainsi les risques de fuites et de défaillances des joints et des points de soudure.

• L'utilisation de HDPE rend les corps robustes et une application d'ozone secure. Ils sont également résistants aux UV, ce qui les rend sûrs pour les applications intérieures ou extérieures.

• Les systèmes de lavage automatique permettent une programmation simple des cycles de rinçage, réduisant ainsi la maintenance et garantissant des performances optimales.

• Des ports de connexion à l'ozone et des débitmètres d'air séparés permettent un flux d'air contrôlé et une injection d'ozone contrôlés avec précision.

• Couvercle à vis en HDPE moulé pour un accès facile.

• Mètre de vision transparent qui vous permettre de surveiller simplement les niveaux de fonctionnement du skimmer.

• Disponible pour les applications d'eau salée et d'eau douce.

Associated Products

["products\/drygoods\/equipment\/etatron-products\/etatron-econtrol-phredox-controller","biosystem\/filtration\/equipment\/monitoring-and-control\/etatron-econtrol-phredox-controller","biosystem\/filtration\/equipment\/monitoring-and-control\/controller\/etatron-econtrol-phredox-controller"]
["products\/drygoods\/equipment\/etatron-products\/etatron-redox-probe","biosystem\/filtration\/equipment\/monitoring-and-control\/etatron-redox-probe","biosystem\/filtration\/equipment\/monitoring-and-control\/probes\/etatron-redox-probe"]