Home / Biosystems / Filtration / Equipment / Heaters / Elecro 2kw Ti Elec Heater 230v Single Phase

Elecro 2kW TI Elec. Heater 230v single phase

Elecro 2kW TI Elec. Heater 230v single phase
  • Description
  • Spares
  • Dimensions

The Elecro Aquatic heater is manufactured from top quality components and material Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking. The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure. Operation The desired water temperature can be easily selected on Elecro Aquatic heater using the easily programmable digital thermostat. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset). Very precise temperature control (to a tolerance of +/- 0.5 degrees C). External reversible flow switch allows in-line fitting with water flow from either direction. High limiting safety thermostat. Integral contactor/relay. 

• Robust, durable construction.

• Fully Equipped.

• Easy to install.

• Titanium flow tube.

• Ultra-reliable flow switch allows safe operation as low as 1m³/hour.

• May be floor or vertically wall mounted.

• Digital control thermostat 0-40°C (0.5°C differential).

• Digital temperature display.

• Anti-cycle protection.

• Safety thermal cut our 60°C (manual reset).

• 1½" BSP female threaded water connections.

Associated Products